There are many ways to reduce the energy consumption of your gas heating. We can help you set up your heating perfectly with our Vaillant Optimum tool!
Reduce your gas consumption immediately
Most heating systems are not running with optimal parameter settings. Optimising these setting can reduce your gas consumption immediately.
Customise your heating to suit your requirements
The standard settings of your heating are not always perfectly tailored to your individual requirements. No one knows your requirements and everyday situation better than you.
Set your heating yourself without previous technical experience
The optimisation of heating parameters takes place exclusively via the user interface of your heating controller. A step-by-step guide supports you from start to finish.
Reduce your carbon footprint over the long term
Domestic heating is a major contributor to global CO₂ emissions. An efficiently running heating reduces your carbon footprint over the long term.
Why is this relevant to me?
When a new heating system is installed, it initially has factory settings. The installation engineer will often improve the parameters with what are known as standard settings during installation or maintenance of the system.
However, no one knows your requirements and everyday situation better than you!
The standard settings of your heating are not always perfectly tailored to your individual requirements. We help you to identify and implement the ideal settings for your heating.
The heating optimisation can be carried out by owners of a (condensing or non-condensing) gas boiler in combination with a Vaillant control unit. Heating optimisation cannot be carried out for heat pumps, systems without a control unit or with a large storage unit (400 l or more), hybrid systems (e.g. heat pumps with gas-fired condensing boiler) or cascade systems (e.g. several gas-fired condensing boilers connected in parallel or series).
The heating control unit is usually hung in the living room – it is used to control the heating. However, the control unit can also be attached to the wall next to the appliance, or integrated into the heating appliance (usually in the middle or on the right), in this case next to the user interface (usually on the left).
The savings potentials shown come from external sources (e.g. RWTH Aachen, 2022; ITG Dresden, 2017) and internal analyses. The savings potentials in the areas of heating and hot water supply should be considered separately, because their weighting in terms of total consumption can differ greatly (e.g. in an old building 80% heating and 20% hot water, in a new build 50% heating and 50% hot water). The savings potentials shown represent average values in an individual analysis and refer to factory settings as a starting point. Since there are dependencies between the parameters, the individual percentages cannot be added together. The total savings are less than the sum of the savings potentials mentioned.
No, the illustrated savings potentials are purely guideline values. The actual savings depend on many factors and can vary considerably.
No, no previous technical experience is required to use Vaillant OPTIMUM. You only make changes to the user interface of your control unit and do not interfere with the technical or gas-conveying system.
You can find many more useful tips and tricks for heating in the 21grad Blog from Vaillant.